User's Manual

27D-Link DIR-840 User Manual
Section 3 - Conguration
Check this box to enable IPSec.
Enter a name for your VPN.
Choose either IKE or Manual from the drop-down menu.
Choose either Tunnel Mode or Transport Mode from the
drop-down menu.
Enter the local (LAN) subnet and mask.
(ex. 192.168.0.0/24)
Enter the remote subnet and mask.
Enter the amount of time in seconds that the Phase 1 and
Phase 2 keys should last.
Choose either ESP, AH or ESP + AH from the drop-down menu.
Enable or Disable the PFS Group option using the drop-down
menu. PFS is an additional security protocol.
Select this option to congure IKE Phase 1 of the VPN Tunnel
to carry out negotiation in a shorter amount of time. (This
option is not recommended as it is less secure)
Manually enter an ASCII passphrase in box.
Choose Always on or Manual from the drop-down menu.
IPSec:
Tunnel Name:
Method:
Mode:
Local Subnet/
Netmask:
Remote Subnet/
Netmask:
Phase1/2 Key
Life Time:
Encapsulation
Protocol:
PFS Group:
Aggressive
Mode:
Preshare Key:
Connecting Type:
IPSec Settings
The DIR-840 supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP
security at the network layer.