User's Manual
23D-Link DIR-840 User Manual
Section 3 - Conguration
This setting can be selected to allow the DIR-840
to choose the channel with the least amount of
interference for the 5GHz band.
Indicates the channel setting for the DIR-840 on the
5GHz band. If you enable Auto Channel Scan, this
option will be greyed out.
Select the Channel Width for the 5GHz band:
Auto 20/40 - This is the default setting. Select if you are
using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
Enter a wireless network name (SSID) that is dierent
from your main wireless network.
Select Invisible if you do not want the SSID of your
wireless network to be broadcasted by the DIR-840. If
Invisible is selected, the SSID will not be seen by Site
Survey utilities so your wireless clients will have to know
the SSID of the DIR-840.
Select the type of security or encryption you would like
to enable for the guest zone.
Enable Auto
Channel Scan
(5GHz):
5GHz Wireless
Channel:
5GHz Wireless
Channel Width:
Wireless
Network Name:
Visibility Status:
Security Mode:
MULTI-SSID List This displays a list of the wireless networks establish
by the DIR-840.