User's Manual

86D-Link DIR-822 User Manual

Section 3 - Conguration

The wizard will either display the wireless network settings to

guide you through manual conguration, prompt you to enter

the PIN for the device, or ask you to press the conguration

button on the device. If the device supports Wi-Fi Protected

Setup and has a conguration button, you can add it to the

network by pressing the conguration button on the device

and then the on the router within 120 seconds. The status

LED on the router will ash three times if the device has been

successfully added to the network.

There are several ways to add a wireless device to your network.

A “registrar” controls access to the wireless network. A registrar

only allows devices onto the wireless network if you have

entered the PIN, or pressed a special Wi-Fi Protected Setup

button on the device. The router acts as a registrar for the

network, although other devices may act as a registrar as well.

Click to start the wizard and refer to page 41.

Add Wireless

Station:

Add Wireless

Device Wizard:

You can also simply press the WPS button on the side of the router, and then

press the WPS button on your wireless client to automatically connect without

logging into the router.

Refer to page 109 for more information.

WPS Button