User's Manual

75D-Link DIR-822 User Manual
Section 3 - Conguration
The following parameters will be available for conguration:
Checkbox:
Tick this option to enable the rule specied.
Name:
Enter a custom name for the rule being created here. This name
is used for identication.
Queue ID:
Select the appropriate priority requirement from the drop-
down menu that will be applied to this rule. Option to choose
from are Highest, Higher, Normal, and Best Eort.
Protocol:
Select the protocol used for the application for in the drop-
down menu and it will automatically place it in the Protocol
eld.
Local IP Range:
Enter the local IP range used here. This is the IP range of your
Local Area Network. The router’s IP cannot be included in this
range.
Remote IP
Range:
Enter the remote IP range used here. This is the IP range of the
public network from the Internet Port side. To apply this rule to
any IP addresses from the public side, enter the range 0.0.0.1 to
255.255.255.254.
Application
Port:
Enter the application port number used here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
trac control and data priority manipulation.