User's Manual

47D-Link DIR-822 User Manual
Section 3 - Conguration
The following parameters will be available for conguration:
Wireless
Band:
Displays the wireless band being congured. In this option we
nd that the following parameters will be regarding the 5 GHz
band.
Enable
Wireless:
Check the box to enable the wireless function. If you do not want
to use wireless, uncheck the box to disable all the wireless func-
tions. Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any sched-
ule you create will be available in the drop-down menu. Click New
Schedule to create a new schedule.
Wireless
Network
Name:
The Service Set Identier (SSID) is the name of your wireless net-
work. Create a name using up to 32 characters. The SSID is case-
sensitive. Enable Auto Channel
802.11 Mode:
Here the user can manually select the preferred frequency band
to use for this wireless network.
Enable Auto
Channel Scan:
The auto channel selection setting can be selected to allow this
device to choose the channel with the least amount of interfer-
ence.
Wireless
Channel:
By default the channel is set to 36. The Channel can be changed
to t the channel setting for an existing wireless network or to
customize the wireless network. If you enable Auto Channel Se-
lection, this option will be greyed out.
Transmission
Rate:
Select the transmit rate. It is strongly suggested to select Best
(Automatic) for best performance.
Channel
Width:
When using the 802.11n frequency band, the user has an op-
tion to choose between a 20 MHz, 20/40 MHz, or 20/40/80 MHz
bandwidth.
Visibility
Status:
The Invisible option allows you to hide your wireless
network. When this option is set to Visible, your wireless network
name is broadcast to anyone within the range of your signal.
When Invisible mode is enabled, you must enter the Wireless
Network Name (SSID) on the client manually, to connect to the
network.