User's Manual

43D-Link DIR-822 User Manual
Section 3 - Conguration
The following parameters will be available for conguration:
Wireless Band:
Displays the wireless band being congured. In this option
we nd that the following parameters will be regarding the
2.4 GHz band.
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. Select the time frame that you would like
your wireless network enabled. The schedule may be set to
Always. Any schedule you create will be available in the drop-
down menu. Click New Schedule to create a new schedule.
Wireless Network
Name:
The Service Set Identier (SSID) is the name of your
wireless network. Create a name using up to 32
characters. The SSID is case-sensitive. Enable Auto
Channel
802.11 Mode:
Here the user can manually select the preferred
frequency band to use for this wireless network.
Enable Auto
Channel Scan:
The auto channel selection setting can be selected to allow
this device to choose the channel with the least amount of
interference.
Wireless Channel:
By default the channel is set to 1. The Channel can be
changed to t the channel setting for an existing
wireless network or to customize the wireless network. If you
enable Auto Channel Selection, this option will be greyed
out.
Transmission
Rate:
Select the transmit rate. It is strongly suggested to select Best
(Automatic) for best performance.
Channel Width:
When using the 802.11n frequency band, the user has an op-
tion to choose between a 20 MHz or 20/40 MHz bandwidth.
Visibility Status:
The Invisible option allows you to hide your wireless net-
work. When this option is set to Visible, your wireless network
name is broadcast to anyone within the range of your signal.
When Invisible mode is enabled, you must enter the Wireless
Network Name (SSID) on the client manually to connect to
the network.