User's Manual
33D-Link DIR-822 User Manual
Section 3 - Conguration
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
My Internet Connection: Select PPTP(Username/Password) from the
drop-down menu.
Address Mode: Here the user can specify whether this Internet
connection requires the use of a Dynamic
or Static IP address. PPTP usually requires a
Dynamic IP conguration.
PPTP IP Address: Enter the PPTP IP address used here. This option
is only available if Static IP is selected.
PPTP Subnet Mask: Enter the PPTP subnet mask used here.
PPTP Gateway IP Address: Enter the PPTP gateway IP address used here.
PPTP Server IP Address: Enter the PPTP server IP address used here. This
is normally the same as the PPTP gateway IP
address.
Username: Enter the PPTP username used here.
Password: Enter the PPTP password used here.
Verify Password: Re-enter the PPTP password used here.
Reconnect Mode
: Use the radio buttons to specify the reconnect
mode. The user can specify a custom schedule
or specify the On Demand, or Manual option. To
specify a custom schedule, use the drop-down
menu to select one of the schedules that has
been dened in the Schedules page. To create
a new schedule, click the New Schedule button
to open the Schedules page. Schedules will be
discussed later.