User's Manual

26D-Link DIR-822 User Manual
Section 3 - Conguration
Step 3: Internet Connection (L2TP)
After selecting the L2TP Internet connection method, the following page
will appear:
The following parameters will be available for conguration:
AddressMode: Here the user can specify whether this Internet
connection requires the use of a dynamic or
static IP address. L2TP usually requires a
dynamic IP conguration.
L2TPIPAddress: Enter the L2TP IP address used here. This
option is only available if Static IP is selected.
L2TP Subnet Mask: Enter the L2TP subnet mask used here.
L2TPGatewayIPAddress: Enter the L2TP gateway IP address used here.
L2TPServerIPAddress: Enter the L2TP server IP address used here.
This is normally the same as the L2TP gateway
IP address.
User Name: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify Password: Re-enter the L2TP password used here.
PrimaryDNSAddress: Enter the primary DNS IP address used here.
SecondaryDNSAddress: Enter the secondary DNS IP address used here.
This eld is normally optional. Only one DNS
address is required for a functional Internet
connection, but using a second DNS address
provides more stability.
Click Next to continue.