User's Manual

25D-Link DIR-822 User Manual
Section 3 - Conguration
Step 3: Internet Connection (PPTP)
After selecting the PPTP Internet connection method, the following page
will appear:
The following parameters will be available for conguration:
AddressMode: Here the user can specify whether this Internet
connection requires the use of a Dynamic or
Static IP address. PPTP usually requires a
dynamic IP conguration.
PPTPIPAddress: Enter the PPTP IP address used here. This op-
tion is only available if Static IP is selected.
PPTP Subnet Mask: Enter the PPTP subnet mask used here.
PPTPGatewayIPAddress: Enter the PPTP gateway IP address used here.
PPTPServerIPAddress: Enter the PPTP server IP address used here.
This is normally the same as the PPTP gateway
IP address.
User Name: Enter the PPTP username used here.
Password: Enter the PPTP password used here.
Verify Password: Re-enter the PPTP password used here.
PrimaryDNSAddress: Enter the primary DNS IP address used here.
SecondaryDNSAddress: Enter the secondary DNS IP address used here.
This eld is normally optional. Only one DNS
address is required for a functional Internet
connection, but using a second DNS address
provides more stability.
Click Next to continue.