User's Manual

24D-Link DIR-822 User Manual
Section 3 - Conguration
Step3:InternetConnection(DynamicIPAddress)
After selecting the Dynamic IP Address Internet connection method, the following page will appear.
The following parameters will be available for conguration:
MACAddress: Enter the MAC address of the Internet gateway
(plugged into the Internet port of this device) here.
Clone Button: If the conguration PC also acts as the Internet
gateway, then click on the Clone Your PC’s MAC
Address button to copy the PC’s MAC address into
the space provided. If you’re not sure, leave the
MAC Address eld blank.
Host Name: Enter the host name used here. If you do not have
or know this information, please contact your ISP.
PrimaryDNSAddress: Enter the Primary DNS IP address used here.
SecondaryDNSAddress: Enter the Secondary DNS IP address used here. This
eld is normally optional. Only one DNS address is
required for a functional Internet connection, but
using a second DNS address provides more
stability.
Click Next to continue.
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following page
will appear:
The following parameters will be available for conguration:
User Name: Enter the PPPoE account user name used here. This
information is given by the ISP.
Password: Enter the PPPoE account password used here. This
information is given by the ISP.
Click Next to continue.