User's Manual Part 1

42D-Link DIR-652 User Manual
5GEVKQP%QPſIWTCVKQP
Transmit Power
Mode
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point
to synchronize a wireless network. Specify
a value. 100 is the default setting and is
recommended.
This value should remain at its default setting
QH+HKPEQPUKUVGPVFCVCƀQYKUCRTQDNGO
QPN[COKPQTOQFKſECVKQPUJQWNFDGOCFG
6JGHTCIOGPVCVKQPVJTGUJQNFYJKEJKUURGEKſGF
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
&GNKXGT[6TCHſE+PFKECVKQP/GUUCIGKUVJG
default setting. A DTIM is a countdown informing
clients of the next window for listening to
broadcast and multicast messages.
Enable this option to prevent associated wireless
clients from communicating with each other.
WMM is QoS for your wireless network. This
will improve the quality of video and voice
applications for your wireless clients.
Check this box to reduce the guard interval
time therefore increasing the data capacity.
However, it’s less reliable and may create higher
data loss.
4RANSMIT0OWER
"EACON0ERIOD
2434HRESHOLD
&RAGMENTATION
$4)-)NTERVAL
7,!.0ARTITION
7--&UNCTION
3HORT')
Advanced Wireless Settings