User's Manual Part 1

30D-Link DIR-652 User Manual
5GEVKQP%QPſIWTCVKQP
Enter a name for the rule. You may select a
RTGFGſPGF CRRNKECVKQP HTQO VJG FTQRFQYP
menu and click <<.
This is the port used to trigger the application. It
can be either a single port or a range of ports.
Select the protocol of the trigger port (TCP,
UDP, or Both).
This is the port number on the Internet side that
will be used to access the application. You may
FGſPG C UKPING RQTV QT C TCPIG QH RQTVU ;QW
can use a comma to add multiple ports or port
ranges.
5GNGEV VJG RTQVQEQN QH VJG ſTGYCNN RQTV 6%2
UDP, or Both).
The schedule of time when the Application Rule
will be enabled. The schedule may be set to
Always, which will allow the particular service
to always be enabled. You can create your own
times in the Tools > 3CHEDULES section.
.AME
4RIGGER
4RAFlC4YPE
&IREWALL
4RAFlC4YPE
3CHEDULE
!PPLICATION2ULES
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These
CRRNKECVKQPUJCXGFKHſEWNVKGUYQTMKPIVJTQWIJ0#60GVYQTM#FFTGUU6TCPUNCVKQP5RGEKCN#RRNKECVKQPUOCMGUUQOGQHVJGUGCRRNKECVKQPU
work with the DIR-652. If you need to run applications that require multiple connections, specify the port normally associated with an
CRRNKECVKQPKPVJGő6TKIIGT2QTVŒſGNFUGNGEVVJGRTQVQEQNV[RGCU6%2QT7&2VJGPGPVGTVJGſTGYCNNRWDNKERQTVUCUUQEKCVGFYKVJVJG
VTKIIGTRQTVVQQRGPVJGOHQTKPDQWPFVTCHſE
6JG&+4RTQXKFGUUQOGRTGFGſPGFCRRNKECVKQPUKPVJGVCDNGQPVJGDQVVQOQHVJGYGDRCIG5GNGEVVJGCRRNKECVKQP[QWYCPVVQWUG
and enable it.