User's Manual Part 1
29D-Link DIR-652 User Manual
5GEVKQP%QPſIWTCVKQP
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click <<VQRQRWNCVGVJGſGNFU
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the “Computer
Name” drop-down menu. Select your computer
and click <<.
'PVGTVJG 6%2 CPFQT 7&2 RQTV QT RQTVU VJCV
you want to open. You can enter a single port
or a range of ports. Seperate ports with a
common.
Example: 24,1009,3000-4000
The schedule of time when the Virtual Server
Rule will be enabled. The schedule may be set
to Always, which will allow the particular service
to always be enabled. You can create your own
times in the Tools > 3CHEDULES section.
Select Allow All (most common) or a created
+PDQWPFſNVGT;QWOC[ETGCVG[QWTQYPKPDQWPF
ſNVGTUKPVJGAdvanced > Inbound Filter page.
.AME
)0!DDRESS
4#05$0
3CHEDULE
)NBOUND&ILTER