User's Manual Part 1

23D-Link DIR-652 User Manual

5GEVKQP%QPſIWTCVKQP

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-652 has a built-in DHCP server. The DHCP Server will automatically assign

CP+2CFFTGUUVQVJGEQORWVGTUQPVJG.#0RTKXCVGPGVYQTM$GUWTGVQUGV[QWTEQORWVGTUVQDG&*%2ENKGPVUD[UGVVKPIVJGKT6%2+2

UGVVKPIUVQő1DVCKPCP+2#FFTGUU#WVQOCVKECNN[Œ9JGP[QWVWTP[QWTEQORWVGTUQPVJG[YKNNCWVQOCVKECNN[NQCFVJGRTQRGT6%2+2UGVVKPIU

provided by the DIR-652. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting

computer. You must specify the starting and ending address of the IP address pool.

Check this box to enable the DHCP server on

your router. Uncheck to disable this function.

Enter the starting and ending IP addresses for

the DHCP server’s IP assignment.

Note: If you statically (manually) assign IP addresses

to your computers or devices, make sure the IP

addresses are outside of this range or you may have

an IP conﬂict.

The length of time for the IP address lease.

Enter the Lease time in minutes.

Enable this feature to broadcast your networks

&*%2UGTXGTVQ.#09.#0ENKGPVU

NetBIOS allows LAN hosts to discover all

other computers within the network, enable

this feature to allow the DHCP Server to offer

0GV$+15EQPſIWTCVKQPUGVVKPIU

Enable this feature to allow WINS information to

be learned from the WAN side, disable to allow

OCPWCNEQPſIWTCVKQP

Enable DHCP

3ERVER

DHCP IP Address

2ANGE

DHCP Lease

4IME

Always

"ROADCAST

NetBIOS

!NNOUNCEMENT

Learn NetBIOS

FROM7!.