User's Manual

92D-Link DIR-645 User Manual
Section 3 - Software Configuration
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to
restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting
Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
The following parameters will be available for configuration:
Name:
Enter the custom name for the new schedule rule here. This
name is used for identification.
Day(s): To use every day in the week for this rule, select the All
Week option. To use only selected days for this rule, select
the Select Day(s) option and tick the appropriate days
used for this rule.
All Day - 24 hrs:
To enable this rule to run 24 hours instead of only a certain
part of the day, tick this option.
Time Format:
Select the appropriate time format to use here.
Start Time:
If the All Day option is not selected, the user can enter the
starting time here.
End Time:
If the All Day option is not selected, the user can enter the
ending time here.
Click on the Add button to add this new rule to the schedule rules list.
Click on the Cancel button to discard the information and cancel the rule addition.
In the Schedule Rules List section, the user can view the available schedule rules created. To edit an existing rule, click on the icon of the specific entry, To remove an
existing rule, click on the icon of the specific entry.