User's Manual

87D-Link DIR-645 User Manual
Section 3 - Software Configuration
System
This section allows you to manage the router’s configuration settings, reboot the
router, and restore the router to the factory default settings. Restoring the unit to the
factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for configuration:
Save Settings To
Local Hard Drive:
Use this option to save the current router configuration
settings to a file on the hard disk of the computer you are
using. First, click the Save button. A file dialog will appear,
allowing you to select a location and file name for the
settings.
Load Settings
From Local Hard
Drive:
Use this option to load previously saved router configuration
settings. First, use the Browse option to find a previously
saved file of configuration settings. Then, click the Restore
Configuration From File button below to transfer those
settings to the router.
Restore To
Factory Default
Settings:
This option will restore all configuration settings back to the
settings that were in effect at the time the router was shipped
from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above.
Reboot The
Device:
Click to reboot the router.
Clear Language
Pack:
If you previously installed a language pack and want to revert all the menus on the Router interface back to the default language settings, click the
Clear button.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.