User's Manual

ManualsBrandsD-Link ManualsElectronicsWhole Home Router 1000

Table Of Contents

83D-Link DIR-645 User Manual

Section 3 - Software Conﬁguration

Time

The Time window allows you to conﬁgure, update, and maintain the correct time on

the internal system clock. From this section you can set the time zone that you are

in and set the Time Server. Daylight Saving can also be conﬁgured to automatically

adjust the time when needed.

The following parameters will be available for conﬁguration:

Time:

Here will be displayed the current time conﬁguration running

on this device.

Time Zone:

Select the appropriate time zone used on this device here.

Enable Daylight

Saving:

Check this box if the country your are located in uses

Daylight Saving time.

Daylight Saving

Offset:

Select the daylight savings offset used here.

Daylight Saving

Dates:

Select the start date and end date for daylight saving time.

Time and Date Conﬁguration

Here the user can conﬁgure the time zone as well as the daylight savings settings used for this router.

Automatic Time and Date Conﬁguration

Here the user can conﬁgure whether this router will automatically synchronize it’s time and date with a public time server.

The following parameters will be available for conﬁguration:

Automatically

synchronize:

NTP is short for Network Time Protocol. NTP synchronizes

computer clock times in a network of computers. Tick this

option to enable automatic time and date synchronizing.

NTP Server Used:

Select the appropriate time server used here. The interval at

which the router will communicate with the NTP server is

set to 7 days.

Update Now:

After selecting the appropriate time server and enabling the automatic synchronization option, click on this button to update the current time and date

of the router.