User's Manual

72D-Link DIR-645 User Manual
Section 3 - Software Configuration
Step 1: In this step the user have two options to choose from. You can choose Auto
if the wireless client supports WPS, or Manual if the wireless client does not support
WPS.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two ways to
add a wireless device, that supports WPS. Firstly, there is the Personal Identification
Number (PIN) method. Using this method will prompt the user to enter a PIN code.
This PIN code should be identical on the wireless client. Secondly, there is the Push
Button Configuration (PBC) method. Using this method will allow the wireless client
to connect to this device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Manual, the following page will appear. On this page to
user can view the wireless configuration of this router. The wireless clients should
configure their wireless settings to be identical to the settings displayed on this page
for a successful connection. This option is for wireless clients that can’t use the WPS
method to connect to this device.
Click on the Prev button to return to the previous page. Click on the Next button
to continue to the next page. Click on the Cancel button to discard the changes
made and return to the main wireless page. Click on the Wireless Status button to
navigate to the Status > Wireless page to view what wireless client are connected to
this device.