User's Manual

61D-Link DIR-645 User Manual
Section 3 - Software Configuration
Access Control
The Access Control option allows you to control access in and out of your network.
Use this feature as Access Controls to only grant access to approved sites, limit web
access based on time or dates, and/or block internet access for applications like P2P
utilities or games.
The following parameters will be available for configuration:
Enable Access
Control:
Tick this option to enable the Access Control feature.
Add Policy:
Click on this button to add a new Access Control Policy.
After clicking on the Add Policy button, the add policy wizard will guide you through
the step-by-step process in adding a new policy. The first window explains the process.
Throughout this wizard the user will be able to:
Click on the Prev button to return to the previous window.
Click on the Next button to continue to the next window.
Click on the Cancel button to discard the changes made and return to the main
Access Control window.
Step 1: In the first step, the user can enter the policy name used.
The following parameters will be available for configuration:
Policy Name:
Enter the new policy name used for this rule here.