User's Manual

49D-Link DIR-645 User Manual
Section 3 - Software Configuration
IPv6 Connection Type: 6to4
In this section the user can configure the IPv6 6to4 connection settings. 6to4 is an
IPv6 address assignment and automatic tunneling technology that used to provide
unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
The following parameters will be available for configuration:
6to4 Address:
Here the 6to4 configured address will be displayed.
6to4 Relay:
Enter the 6to4 relay address used here.
Primary DNS
Server:
Enter the primary DNS Server address used here.
Secondary DNS
Server:
Enter the secondary DNS Server address used here.
The following parameters will be available for configuration:
LAN IPv6
Address:
Enter the LAN IPv6 address used here. This address must be
in the ‘/64’ subnet.
LAN IPv6 Link-
Local Address:
Displays the LAN IPv6 Link-Local address used here.
The following parameters will be available for configuration:
Enable Automatic
IPv6 address:
The user can tick this option to enable the auto-configuration
feature.
Autoconfiguration
Type:
The user can select the auto-configuration type used here.
Router
Advertisement
Lifetime:
This option is only available when the auto-configuration
type is set to Stateless. Enter the router advertisement
lifetime value used here.