User's Manual

47D-Link DIR-645 User Manual
Section 3 - Software Configuration
IPv6 Connection Type: IPv6 in IPv4 Tunnel
In section to the user can configure the IPv6 connection to run in IPv4 Tunnel mode.
IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6
packets can be sent over an IPv4 infrastructure.
The following parameters will be available for configuration:
Remote IPv4
Address:
Enter the remote IPv4 address used here.
Remote IPv6
Address:
Enter the remote IPv6 address used here.
Local IPv4
Address:
Enter the local IPv4 address used here.
Local IPv6
Address:
Enter the local IPv6 address used here.
Subnet Prefix
Length:
Enter the Subnet prefix length value used here.
The following parameters will be available for configuration:
Obtain IPv6
DNS Servers
automatically:
Select this option to obtain the DNS Server addresses
automatically.
Use the following
IPv6 DNS
Servers:
Select this option to manually enter the DNS Server
addresses used.
Primary DNS
Server:
Enter the WAN primary DNS Server address used here.
Secondary DNS
Server:
Enter the WAN secondary DNS Server address used here.