User's Manual

42D-Link DIR-645 User Manual
Section 3 - Software Configuration
Primary DNS
Server:
Enter the WAN primary DNS Server address used here.
Secondary DNS
Server:
Enter the WAN secondary DNS Server address used here.
The following parameters will be available for configuration:
LAN IPv6
Address:
Enter the LAN (local) IPv6 address for the router here.
LAN IPv6 Link-
Local Address:
Displays the Router’s LAN Link-Local Address here.
The following parameters will be available for configuration:
Enable Automatic
IPv6 address:
The user can tick this option to enable the auto-configuration
feature.
Autoconfiguration
Type:
The user can select the auto-configuration type used here.
Router
Advertisement
Lifetime:
This option is only available when the auto-configuration
type is set to Stateless. Enter the router advertisement
lifetime value used here.
IPv6 Address
Range (Start):
This option is only available when the auto-configuration
type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address
Range (End):
This option is only available when the auto-configuration
type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address
Lifetime:
This option is only available when the auto-configuration
type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.