User's Manual

35D-Link DIR-645 User Manual
Section 3 - Software Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways
to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet
Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that have not configured a router before, click on the IPv6
Internet Connection Setup Wizard button and the router will guide you through
a few simple steps to get your network up and running.
After clicking on the IPv6 Internet Connection Setup Wizard button, this page will
appear.
Welcome to the D-Link IPv6 Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new
D-Link router and connect to the IPv6 Internet.
Click Next to continue to the next page. Click Cancel to discard the changes made
and return to the main page.
Step 1: Configure Your IPv6 Internet Connection
The router will try and detect whether its possible to obtain the IPv6 Internet Connection
type automatically. If this succeeds then the user will be guided through the input of
the appropriate parameters for the connection type found.
However, if the automatic detection fails, the user will be prompt to either Try again
or to click on the Guide me through the IPv6 settings button to initiate the
manual continual of the wizard.