User's Manual

26D-Link DIR-645 User Manual
Section 3 - Software Configuration
Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the WPS connection method, this Wi-Fi Protected
Setup Wizard can be used to initiate a wireless connection between this device and
Wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup
Wizard is specially designed to assist basic network users with a simple, step-by-step
set of instructions to connect wireless clients to this router using the WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless Device
with WPS button.
Step 1: In this step the user have two options to choose from. You can choose Auto
if the wireless client supports WPS, or Manual if the wireless client does not support
WPS.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two ways to
add a wireless device, that supports WPS. Firstly, there is the Personal Identification
Number (PIN) method. Using this method will prompt the user to enter a PIN code.
This PIN code should be identical on the wireless client. Secondly, there is the Push
Button Configuration (PBC) method. Using this method will allow the wireless client
to connect to this device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.