User's Manual

25D-Link DIR-645 User Manual
Section 3 - Software Configuration
Step 2: This step will only be available if the user selected ‘Manually assign a network
key’ in the previous step. Here the user can manually enter the WPA/WPA2 pre-shared
key in the Wireless Security Password space provided. The key entered must be
between 8 and 63 characters long. Remember, this key will be used when wireless
clients wants to connect to this device. So please remember this key to prevent future
troubleshooting.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Setup Complete: On this page the user can view the configuration made and verify
whether they are correct.
Click on the Prev button to return to the previous page. Click on the Cancel button
to discard the changes made and return to the main wireless page. Click on the Save
button to accept the changes made.
After click the Save button the device will save the settings made and return to the
main wireless page.