User's Manual

14D-Link DIR-645 User Manual
Section 3 - Software Configuration
Step 3: Internet Connection (PPTP)
After selecting the PPTP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode:
Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPTP
usual requires a Dynamic IP configuration.
PPTP IP Address:
Enter the PPTP IP address used here. This option is only
available if Static IP is selected.
PPTP Subnet
Mask:
Enter the PPTP Subnet Mask used here.
PPTP Gateway IP
Address:
Enter the PPTP Gateway IP address used here.
PPTP Server IP
Address:
Enter the PPTP Server IP address used here. This is normally
the same a the PPTP Gateway IP address.
User Name:
Enter the PPTP username used here.
Password:
Enter the PPTP password used here.
Verify Password:
Re-enter the PPTP password used here.
Primary DNS
Address:
Enter the Primary DNS IP address used here.
Secondary DNS
Address:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
but using a second DNS address provides more stability.
Click Next to continue.