User's Manual

13D-Link DIR-645 User Manual
Section 3 - Software Configuration
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode:
Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPPoE
usually requires a Dynamic IP configuration.
IP Address:
Enter the PPPoE IP address used here. This option is only
available if Static IP is selected.
User Name:
Enter the PPPoE account user name used here. This
information is given by the ISP.
Password:
Enter the PPPoE account password used here. This
information is given by the ISP.
Verify Password:
Re-enter the PPPoE account password used here.
Service Name:
This optional field enables the user to enter a service name
to identify this Internet connection here.
Primary DNS
Address:
Enter the Primary DNS IP address used here.
Secondary DNS
Address:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
but using a second DNS address provides more stability.
Click Next to continue.