User's Manual

12D-Link DIR-645 User Manual
Section 3 - Software Configuration
Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method, the following
page will appear.
The following parameters will be available for configuration:
MAC Address:
Enter the MAC address of the Internet gateway (plugged into
the Internet port of this device) here.
Clone Button:
If the configuration PC also acts as the Internet gateway, then
click on the Clone Your PC’s MAC Address button to copy
the PC’s MAC address into the space provided. If you’re not
sure, leave the MAC Address field blank.
Host Name:
Enter the host name used here. You may also need to provide
a Host Name. If you do not have or know this information,
please contact your ISP.
Primary DNS
Address:
Enter the Primary DNS IP address used here.
Secondary DNS
Address:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
but using a second DNS address provides more stability.
Click Next to continue.