User's Manual

91D-Link DIR-836L User Manual
Section 3 - Conguration
IPv6 Firewall
5IF%*3-T*1W'JSFXBMMGFBUVSFBMMPXTZPVUPDPOöHVSFXIJDILJOEPG*1WUSBóDJTBMMPXFEUPQBTTUISPVHIUIFEFWJDF
5IF%*3-T*1W'JSFXBMMGVODUJPOTJOBTJNJMBSXBZUPUIF*1'JMUFSTGFBUVSF
Check the box to enable the IPv6 rewall simple security.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 rewall rule.
Use the drop-down menu to select the time schedule that
UIF*1W'JSFXBMM3VMFXJMMCFFOBCMFEPO5IFTDIFEVMFNBZ
be set to Always, which will allow the particular service to
BMXBZTCFFOBCMFE:PVDBODSFBUFZPVSPXOUJNFTJOUIF
Tools > Schedules section.
Use the Source drop-down menu to specify the interface
that connects to the source IPv6 addresses of the rewall
rule.
Enter the source IPv6 address range in the adjacent IP Address Range eld.
Use the Dest drop-down menu to specify the interface that connects to the destination IP addresses of the rewall rule.
Select the protocol of the rewall port (All, TCP, UDP, or ICMP).
Enter the rst port of the range that will be used for the rewall rule in the rst box and enter the last port in the eld in the second
box.
Enable Checkbox:
Congure IPv6
Firewall:
Name:
Schedule:
Source:
IP Address Range:
Dest:
Protocol:
Port Range: