User's Manual

82D-Link DIR-836L User Manual
Section 3 - Conguration
Enter a name for the inbound lter rule.
Select Allow or Deny.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Enter the ending IP address. Enter 255.255.255.255
if you do not want to specify and IP range.
Click the AddCVUUPOUPBQQMZZPVSTFUUJOHT:PV
must click Save Settings at the top to save the
settings.
5IJTTFDUJPOXJMMMJTUBOZSVMFTUIBUBSFDSFBUFE:PV
may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon
to remove the rule.
Name:
Action:
Enable:
Remote IP Start:
Remote IP End:
Add:
Inbound Filter
Rules List:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
4FSWFS1PSU'PSXBSEJOHPS3FNPUF"ENJOJTUSBUJPOGFBUVSFT
Inbound Filters