User's Manual

56D-Link DIR-836L User Manual
Section 3 - Conguration
Access Files from the Internet
*GZPVXPVMEMJLFUPBDDFTTZPVSöMFTUIBUBSFPOZPVS64#UIVNCESJWFPSFYUFSOBMIBSEESJWFUIBUJTDPOOFDUFEUPZPVSSPVUFSGPMMPXUIFTUFQTCFMPX
Step 1 - Enable SharePort Web Access
Check the Enable SharePort Web Access checkbox to enable. Then
enter the port(s) you want to use for HTTP and HTTPS. The default
for HTTP is 8181 and HTTPS is 4433.
Step 2 - Create a User Account
Under User Creation, enter a username and password, and then click
Add/Edit.
Step 3 - Congure your Access Path
Under User List, click the Modify icon for the user you just created.
Here you can browse to the folder on your USB storage device you
want to assign the Access Path to.
Step 4 - Save Settings
If you want to add more users, repeat steps 3 and 4. Once you are
nished, click the Save Settings button at the top to save your
settings.
Note that under the SharePort Web Access Link (at the bottom) will
EJTQMBZUIF63-TZPVDBOVTFUPDPOOFDUUPUIF64#ESJWF"MTPJG
you selected HTTPS, you must type in HTTPS:// instead of HTTP://
to get a secure connection.
For example, if you selected HTTPS and changed the port to 3200,
and your WAN IP address of the router is 1.2.3.4, then you would
enter HTTPS://1.2.3.4:3200 to connect.