User's Manual

49D-Link DIR-836L User Manual
Section 3 - Conguration
DHCP Server Settings
%)$1TUBOETGPS%ZOBNJD)PTU$POUSPM1SPUPDPM5IF%*3-IBTBCVJMUJO%)$1TFSWFS5IF%)$14FSWFSXJMMBVUPNBUJDBMMZ
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
UIFQSPQFS5$1*1TFUUJOHTQSPWJEFECZUIF%*3-5IF%)$14FSWFSXJMMBVUPNBUJDBMMZBMMPDBUFBOVOVTFE*1BEESFTTGSPN
UIF*1BEESFTTQPPMUPUIFSFRVFTUJOHDPNQVUFS:PVNVTUTQFDJGZUIFTUBSUJOHBOEFOEJOHBEESFTTPGUIF*1BEESFTTQPPM
Check this box to enable the DHCP server on your router.
Uncheck to disable this function.
Enter the starting and ending IP addresses for the DHCP server’s
IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conict.
The length of time for the IP address lease. Enter the Lease time
in minutes.
Enable this feature to broadcast your networks DHCP server to
LAN/WLAN clients.
NetBIOS allows LAN hosts to discover all other computers within
the network, enable this feature to allow the DHCP Server to
oer NetBIOS conguration settings.
Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual conguration.
This feature allows the conguration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no eect if
the ‘Learn NetBIOS information from WAN’ is activated.
Enable DHCP
Server:
DHCP IP Address
Range:
DHCP Lease Time:
Always
Broadcast:
NetBIOS
Announcement:
Learn NetBIOS
from WAN:
NetBIOS Scope: