User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
63D-Link DIR-627 User Manual
Section 11 - Connecting to an Unsecured Wireless Network
3. Click Ethernet on the left to see the local network settings.
TCP/IP settings should be set to obtain an IP address from
a DHCP server (i.e. wireless router) automatically. The
IP address, its subnet mask and the router’s IP address
displays when selecting UsingDHCP from the Congure
IPv4 drop-down menu.
If you are not using a DHCP capable gateway/router, or you
need to assign a static IP address, select Manually from the
CongureIPv4 drop-down menu to manually enter the IP
address and it’s subnet mask.
4. Click the Apply button to save the settings.