User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
25D-Link DIR-627 User Manual
Section 3 - Conguration
WPS
Method:
802.11
Authen-
tication:
802.1X
Authen-
tication:
WPA:
WPA-PSK:
WPA2:
WPA2-PSK:
WEP
Encryption:
WPA
Encryption:
RADIUS
Server:
RADIUS
Port:
RADIUS
Key:
WPA
Passphrase:
Click the Start button to use the Push Button Conguration (PBC) Wi-Fi Protected Setup (WPS) method.
Choose the 802.11 authentication method, either Open or Shared.
Once the user has decided on the network authentication type, choose either Enabled or Disabled to enable or disable
network authentication.
Choose either Enabled or Disabled to enable or disable Wi-Fi Protected Access (WPA).
Choose either Enabled or Disabled to enable or disable Wi-Fi Protected Access Pre-Shared Key (WPA-PSK).
Choose either Enabled or Disabled to enable or disable Wi-Fi Protected Access 2 (WPA2).
Choose either Enabled or Disabled to enable or disable Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK).
Choose either Enabled or Disabled to enable or disable Wired Equivalent Privacy (WEP) encryption.
First enable WPA above and then choose the WPA data encryption algorithm, AES or TKIP+AES.
Set the IP address of the RADIUS server used for authentication and dynamic key derivation.
Set the UDP port number of the RADIUS server. The port number is usually 1812 or 1645, depending on the server. The
default RADIUS port number is 1812.
Set the shared secret for the RADIUS connection.
Set the WPA passphrase. Use the Clickheretodisplay button to display the WPA passphrase.