User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
24D-Link DIR-627 User Manual
Section 3 - Conguration
Security
The Security page allows users to congure security for the wireless interfaces.
Choose either Enabled or Disabled to enable
or disable Wi-Fi Protected Setup (WPS) simple
conguration mode.
Enter a mnemonic name that can be used to identify
the Router.
This displays the Wi-Fi Protected Setup (WPS)
UUID number of the Router.
Click the Generate button to create a PIN number
for the Router.
Choose either Enabled or Disabled to enable or
disable the Router’s built-in registrar feature.
Set the Wi-Fi Protected Setup (WPS) conguration
state to Cong(ur)ed or Uncong(ur)ed.
Displays the current Wi-Fi Protected Setup (WPS)
mode.
Displays the Wi-Fi Protected Setup (WPS)
processing status.
Choose the desired Wi-Fi Protected Setup (WPS)
action, Add Enrollee or Cong AP.
WPS
Congur-
ation:
Device
Name:
DeviceWPS
UUID:
DevicePIN:
WPSBuilt-in
Registrar:
WPS
Cong
State:
WPS
Current
Mode:
WPS
Current
Status:
WPS
Action: