User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
17D-Link DIR-627 User Manual
Section 3 - Conguration
PPPoE
Service
Name:
PPPoE
Access
Concentrator:
PPPoE
ConnectOn
Demand:
PPPoEMax
IdleTime:
PPPoEKeep
Alive:
PPPoEMTU:
Connection
Status:
IPAddress
ExpiresIn:
Static
Routes:
Set the PPPoE service name. This is required by some ISPs.
Set the PPPoE access concentrator. This is required by some ISPs.
Choose either Enabled or Disabled. This determines whether the PPPoE link should be automatically disconnected if no
trafc has been observed for the period species by the PPPoE Max Idle Time.
Set the number of seconds to wait before disconnecting the PPPoE link if PPPoE Connect on Demand is Enabled. The
default is 300 seconds.
Choose either Enabled or Disabled. This determines whether the PPPoE link should be automatically restored if it is lost.
This setting has no effect if PPPoE Connect on Demand is Enabled.
Set the maximum number of bytes that the PPPoE interface will transmit in a single Ethernet frame.
This displays the connection state.
This displays IP address lease information.
Set up static routes in this section.