User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
15D-Link DIR-627 User Manual
Section 3 - Conguration
Displays the MAC address of the LAN interface.
This is also referred to as the Ethernet address.
Set the IP address of the LAN interface.
Set the IP netmask of the LAN interface.
Choose either Enabled or Disabled. This controls
DHCP server functionality on the LAN.
Set the start of the IP address range that the DHCP
server will use.
Set the end of the IP address range that the DHCP
server will use.
Set the number of seconds a DHCP lease should
be valid for.
This displays active DHCP leases since the last
reboot.
LAN
The LAN page allows users to congure the LAN of the Router.
MAC
Address:
IPAddress:
SubnetMask:
DHCP
Server:
DHCPStarting
IPAddress:
DHCPEnding
IPAddress:
DHCPLease
Time:
DHCPClient
List: