User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Configuring the Network in MAC OS X Snow Leopard (10.6)
- Configuring the Wireless Network in MAC OS X Snow Leopard (10.6)
- Troubleshooting
- Wireless Basics
- Networking Basics
8D-Link DIR-627 User Manual
Section 2 - Installation
WallMountingYourDevice
You can mount the Router to a wall or a partition for easy and convenient placement of your device.
To wall mount your device,
A. Place the two provided screw anchors about 15
centimeters (~6 inches) apart in the wall or partition
where the device is to be placed.
B. Drive the two provided screws into the screw anchors
in the wall or partition where the device is to be
placed.