User's Manual
Table Of Contents
- 2.pdf
- 3.pdf
- 4.pdf
- 5.pdf
- 6.pdf
- 7.pdf
- 8.pdf
- 9.pdf
- 10.pdf
- 11.pdf
- 12.pdf
- 13.pdf
- 14.pdf
- 15.pdf
- 16.pdf
- 17.pdf
- 18.pdf
- 19.pdf
- 20.pdf
- 21.pdf
- 22.pdf
- 23.pdf
- 24.pdf
- 25.pdf
- 26.pdf
- 27.pdf
- 28.pdf
- 29.pdf
- 30.pdf
- 31.pdf
- 32.pdf
- 33.pdf
- 34.pdf
- 35.pdf
- 36.pdf
- 37.pdf
- 38.pdf
- 39.pdf
- 40.pdf
- 41.pdf
- 42.pdf
- 43.pdf
- 44.pdf
- 45.pdf
- 46.pdf
- 47.pdf
- 48.pdf
- 49.pdf
- 50.pdf
- 51.pdf
- 52.pdf
- 53.pdf
- 54.pdf
- 55.pdf
- 56.pdf
- 57.pdf
- 58.pdf
- 59.pdf
- 60.pdf
- 61.pdf
- 62.pdf
- 63.pdf
- 64.pdf
- 65.pdf
- 66.pdf
- 67.pdf
- 68.pdf
- 69.pdf
- 70.pdf
- 71.pdf
- 72.pdf
- 73.pdf
- 74.pdf
- 75.pdf
- 76.pdf
- 77.pdf
- 78.pdf
- 79.pdf
- 80.pdf
- 81.pdf
- 82.pdf
- 83.pdf
- 84.pdf
- 85.pdf
- 86.pdf
- 87.pdf
- 88.pdf
- 89.pdf
- 90.pdf
- 91.pdf
- 92.pdf
- 93.pdf
- 94.pdf
- 95.pdf
- 96.pdf
- 97.pdf
- 98.pdf
42D-Link DIR-618 User Manual
Section 3 - Configuration
Firewall & DMZ
This section will allow you to set up a DMZ host and to set up firewall rules.
If you have a client PC that cannot run Internet applications properly from behind the DIR-618, then you can set the
client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for
gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ
(Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort.
Check this to enable SPI and Anti-Spoof.
Check this box to enable DMZ.
Enter the IP address of the computer you would
like to open all ports to.
Choose a name for the firewall rule.
Select to Allow or Deny transport of the data packets
according to the criteria de
fined in the rule.
The Source/Destination is the TCP/UDP port on
either the LAN or WAN side.
Click New Schedule to access the Schedules
window. See Maintenance>Schedules for more
information.
Enter a beginning and ending IP address.
Select the transport protocol that will be used for
the filter rule.
Enter the desired port range for the filter rule.
Enable DMZ
Host:
DMZ IP
Address:
Name:
Action:
Source/Dest:
Schedule:
IP Address:
Protocol:
Port Range:
Enable SPI
andAnti-Spoof: