User's Manual
Table Of Contents
- 2.pdf
- 3.pdf
- 4.pdf
- 5.pdf
- 6.pdf
- 7.pdf
- 8.pdf
- 9.pdf
- 10.pdf
- 11.pdf
- 12.pdf
- 13.pdf
- 14.pdf
- 15.pdf
- 16.pdf
- 17.pdf
- 18.pdf
- 19.pdf
- 20.pdf
- 21.pdf
- 22.pdf
- 23.pdf
- 24.pdf
- 25.pdf
- 26.pdf
- 27.pdf
- 28.pdf
- 29.pdf
- 30.pdf
- 31.pdf
- 32.pdf
- 33.pdf
- 34.pdf
- 35.pdf
- 36.pdf
- 37.pdf
- 38.pdf
- 39.pdf
- 40.pdf
- 41.pdf
- 42.pdf
- 43.pdf
- 44.pdf
- 45.pdf
- 46.pdf
- 47.pdf
- 48.pdf
- 49.pdf
- 50.pdf
- 51.pdf
- 52.pdf
- 53.pdf
- 54.pdf
- 55.pdf
- 56.pdf
- 57.pdf
- 58.pdf
- 59.pdf
- 60.pdf
- 61.pdf
- 62.pdf
- 63.pdf
- 64.pdf
- 65.pdf
- 66.pdf
- 67.pdf
- 68.pdf
- 69.pdf
- 70.pdf
- 71.pdf
- 72.pdf
- 73.pdf
- 74.pdf
- 75.pdf
- 76.pdf
- 77.pdf
- 78.pdf
- 79.pdf
- 80.pdf
- 81.pdf
- 82.pdf
- 83.pdf
- 84.pdf
- 85.pdf
- 86.pdf
- 87.pdf
- 88.pdf
- 89.pdf
- 90.pdf
- 91.pdf
- 92.pdf
- 93.pdf
- 94.pdf
- 95.pdf
- 96.pdf
- 97.pdf
- 98.pdf
35D-Link DIR-618 User Manual
Section 3 - Configuration
Check the box to enable the DHCP server on
your router. Uncheck to disable this function.
Enter the starting and ending IP addresses for
the DHCP server’s IP assignment.
The length of time for the IP address lease.
Enter the Lease time in minutes.
Enable DHCP
Server:
DHCP IP
Address Range:
DHCP Lease
Tim
Enable IP/
MAC Binding:
e:
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol.
The DIR-618 has a built-in DHCP server. The DH-
CP Server will automatically assign an IP address
to the computers on the LAN/private network. Be
sure to set your computers to be DHCP clients by
setting their TCP/IP settings to “Obtain an IP
Address Automatically.” When you turn your com-
puters on, they will automatically load the proper
TCP/IP settings provided by the DIR-618. The
DHCP Server will automatically allocate an unused
IP address from the IP address pool to the
requesting computer. You must specify the starting
and ending address of the IP address pool.
Enable this function to protect the computer in
DHCP Reservation pool from ARP attack.