User's Manual
Table Of Contents
- 2.pdf
- 3.pdf
- 4.pdf
- 5.pdf
- 6.pdf
- 7.pdf
- 8.pdf
- 9.pdf
- 10.pdf
- 11.pdf
- 12.pdf
- 13.pdf
- 14.pdf
- 15.pdf
- 16.pdf
- 17.pdf
- 18.pdf
- 19.pdf
- 20.pdf
- 21.pdf
- 22.pdf
- 23.pdf
- 24.pdf
- 25.pdf
- 26.pdf
- 27.pdf
- 28.pdf
- 29.pdf
- 30.pdf
- 31.pdf
- 32.pdf
- 33.pdf
- 34.pdf
- 35.pdf
- 36.pdf
- 37.pdf
- 38.pdf
- 39.pdf
- 40.pdf
- 41.pdf
- 42.pdf
- 43.pdf
- 44.pdf
- 45.pdf
- 46.pdf
- 47.pdf
- 48.pdf
- 49.pdf
- 50.pdf
- 51.pdf
- 52.pdf
- 53.pdf
- 54.pdf
- 55.pdf
- 56.pdf
- 57.pdf
- 58.pdf
- 59.pdf
- 60.pdf
- 61.pdf
- 62.pdf
- 63.pdf
- 64.pdf
- 65.pdf
- 66.pdf
- 67.pdf
- 68.pdf
- 69.pdf
- 70.pdf
- 71.pdf
- 72.pdf
- 73.pdf
- 74.pdf
- 75.pdf
- 76.pdf
- 77.pdf
- 78.pdf
- 79.pdf
- 80.pdf
- 81.pdf
- 82.pdf
- 83.pdf
- 84.pdf
- 85.pdf
- 86.pdf
- 87.pdf
- 88.pdf
- 89.pdf
- 90.pdf
- 91.pdf
- 92.pdf
- 93.pdf
- 94.pdf
- 95.pdf
- 96.pdf
- 97.pdf
- 98.pdf
23D-Link DIR-618 User Manual
Section 3 - Configuration
The Host Name is optional but may be required by some
ISPs. The default host name is the device name of the
Router and may be changed.
The default MAC Address is set to the WAN’s physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP.
The default MAC address is set to the WAN’s physical
interface MAC address on the Broadband Router. You
can use the “Clone MAC Address” button to copy the MAC
address of the Ethernet Card installed by your ISP and
replace the WAN MAC address with the MAC address of the
router. It is not recommended that you change the default
MAC address unless required by your ISP.
Enter the DNS (Domain Name Server) server IP address
assigned by your ISP.the secondary DNS address is
optional .
Host
Name:
MAC Address:
Internet Setup
Dynamic
Clone MAC
Address:
Primary /
Secondary
DNS
Addresses:
MTU:
Maximum Transmission Unit - You may need to change
the MTU for optimal performance with your specific ISP.
To manually set up the Internet connection, click the Manual Internet Connection Setup button on the Router’s
opening window.