User's Manual
39
D-Link DIR-6User Manual
Section 3 - Configuration
Enter a New Password for the administrator login name and
then retype the new password in the Confirm Password
textbox. The administrator can make changes to the
settings.
Remote management allows the DIR-6 to be configured
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
The Internet IP address of the computer that has access to
the Broadband Router. If you leave this field blank or type
0.0.0.0, then any computer will be able to access the Router.
This would present a security risk and is not recommended.
The port number used to access the DIR-6. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of
the DIR-6 and 8080 is the port used for the Web-Management interface.
The port number used to access the DIR-6. For example: https://x.x.x.x:443 whereas x.x.x.x is the WAN IP address of
the DIR-6 and 443 is the port used for the Web-Management interface.
This window will allow you to change the Administrator password. You can also enable Remote Management.