User's Manual

33
D-Link DIR-6 User Manual
Section 3 - Configuration
Enter the MAC or IP address of a network
adapter for a filter rule.
Enter a port or range of ports of TCP or UDP
for the filter rule.
Select a traffic type (TCP, UDP, or Any) that will
be used for the filter rule.
Use the drop-down menu to select  or
 the network access.
Select  to apply for this filter rule all
the time, or select one of the scheduled time.
The scheduled time should be configured in
 >  section in advance.







The Filter Rules allows you to configure IP or MAC address of a network adapter and allow or deny its network access
at certain time.
