User's Manual
17
D-Link DIR-6 User Manual
Section 3 - Configuration
Enter your PPPoE user name.
Enter your PPPoE password.
Retype the password.
Enter the ISP Service Name. The Service Name is optional
but may be required by some ISPs.
Click to get the DNS automatically.
Click to enter the DNS information
below.
Enter the Primary and Secondary DNS Server Addresses.
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable
this feature, enable Auto-reconnect.
Maximum Transmission Unit - You may need to change
the MTU for optimal performance with your specific ISP.
Click the (Point to Point Protocol over Ethernet) radio button to see the following configuration if your
ISP uses dynamic PPPoE .