User's Manual

13
D-Link DIR-6 User Manual
Section 3 - Configuration
Select the type of Internet connection you use and then
configure the information below.
If clicking the  radio button, enter
the username in the  field and password in
 and  fields.
The  is optional but may be required by
some ISPs.
If clicking the  radio button, enter the username
in the  field and password in  and
  fields. Tick the   
check box to enable IP unnumbered on LAN (1-3)
interface, and NAT on Wireless Interface.
The  is optional but may be required by
some ISPs.
Enter the static IP address and its subnet mask in the IP
 and .
After that enter the start and end LAN IP address in the
fields.
Click  to continue.