User Manual Part 1

30D-Link DIR-615 User Manual

Section 3 - Conﬁguration

Select the transmit rate. It is strongly suggested to select

Best (Auto) for best performance.

Select the Channel Width:

Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-615. If Invisible is selected,

the SSID of the DIR-615 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your

DIR-615 in order to connect to it.

Refer to page 79 for more information regarding wireless security.

Visibility Status:

Wireless Security:

Channel Width:

Transmission Rate: