User's Manual

46D-Link DIR-605L User Manual
Section 3 - Conguration
System Check
VCT is an advanced feature that integrates a LAN cable
tester on every Ethernet port on the router. Through the
graphical user interface (GUI), VCT can be used to remotely
diagnose and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature signicantly
reduces service calls and returns by allowing users to easily
troubleshoot their cable connections.
The Ping Test is used to send ping packets to test if a
computer is on the Internet. Enter the IP address that you
wish to ping, and click Ping. The results will be shown under
Ping Result.
Virtual Cable
Tester (VCT) Info:
Ping Test:
This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be used to test
the status of the Internet.