User's Manual

40D-Link DIR-605L User Manual
Section 3 - Conguration
Tick this checkbox to enable or disable xed routes to
dened destinations.
Use the drop-down menu to choose the WAN or WAN
(Physical Port) Interface the IP packet must use to transit
out of the router.
The IP address of the packets that will take this route.
The subnet of the IP address of the packets that will take
this route.
Species the next hop to be taken if this route is used.
Enable:
Interface:
Destination:
Subnet Mask:
Gateway:
Routing
This option allows you to dene xed routes to dened destinations. Click Save Settings to apply your settings.