User's Manual

30D-Link DIR-605L User Manual
Section 3 - Conguration
Advanced
Advanced Port Forwarding Rules
This will allow you to open a single port or a range of ports. Click Save Settings to apply your settings.
Check the box to enable the rule.
Enter a name for the rule. You can also choose from the
Application Name drop-down box.
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. You can also
choose from the Computer Name drop-down box.
Enter the port or range of ports that you want to open. If you
want to open one port, enter the same port in both boxes.
Select TCP, UDP, or Any to specify the protocol.
Rule:
Name:
IP Address:
Public Port/
Private Port:
Trac Type: