User's Manual

25D-Link DIR-605L User Manual
Section 3 - Conguration
1. To enable WPA, WPA2, or WPA/WPA2, select either Enable WPA
Only Wireless Security (enhanced), Enable WPA2 Only Wireless
Security (enhanced), or Enable WPA/WPA2 Wireless Security
(enhanced).
2. Next to Cipher Type, select AUTO, TKIP, or AES.
3. Next to PSK/EAP, select PSK.
4. Next to Network Key, enter a passphrase. The key is an
alpha-numeric password between 8 and 63 characters long.
The password can include symbols (!?*&_) and spaces. Make
sure you enter this key exactly the same on all other wireless
clients.
5. Click Save Settings to save your settings. If you are conguring
the router with a wireless adapter, you will lose connectivity
until you enable WPA, WPA2, or WPA/WPA2 (whichever of the
three options you have selected above) on your adapter and
enter the same network key as you did on the router.